Arduino 电子编程--灯项目及控制,主要使用Arduino编程控制LED灯，实现基本控制Project 1 LED闪烁，基本的应用Project 3和4红绿灯项目
项目1 Project 1 LED Blink
// Project 1 - LED Blink
/* Coding Ron Wang
May 20th 2024
Autaba support for coding hardware
*/
int ledPin = 10;
void setup() {
pinMode(ledPin, OUTPUT);
}
void loop() {
digitalWrite(ledPin, HIGH);
delay(1000);
digitalWrite(ledPin, LOW);
delay(1000);
} 版权声明：本文为原创文章，版权归donstudio所有，欢迎分享本文，转载请保留出处！
Arduino 程序基础，介绍Arduino程序的基本组成，第一部分编写了10个例子，关于变量及变量名称，串口监视器，if循环,for循环，while循环等。第二部分介绍了函数，全局变量，局部变量和静...
You will need to obtain a standard RC servo; any of the small or mid-sized servos will do. Larger se...
Project 49 IR Remote Control/* Project 49 IR Remote Control * C...
First, you’re going to simply control the speed of a DC motor in one direction, using a power transi...
About the Ultrasonic sensor knowledge and infor mation click the link : Arduino Project 038 - S...
There are many different ways to drive LEDs. Using shift registers is one way and they have their a...